Sos Roofline Article Central

Iscar is announcing Penta 34 carbide inserts using a brand new PB chipformer. The PB chipformer includes a single cavity using a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer using a dissimilar frontal edge.

The new chipformer was intended for machining soft materials. It is an excellent solution for parting bearing steel and other tremendously ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the brand new chipformer and IC908 grade provides remarkable chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the flexible IC908 PVD coated grade. The brand new family broadens the application range of Iscar's most economical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when examined to a competitor's tool, is a triumphant solution for machining any soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a brand new family of reinforced Tang-Grip blades for the celebrated TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced architecture, can be employed in long overhang. Only the part of the blade essential for penetration (cutting depth) has a reduced width. The rest is thick, which provides upgraded rigidity and stiffness. These blades are an excellent solution for parting and grooving between the main and sub-spindle of turn/mill machines. The single-ended insert has a incredibly rigid clamping and therefore provides a substantially valuable advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts built from the brand new Sumo Tec carbide grades: IC807 IC808 and IC830. The brand new Sumo Tec grades greatly increase insert life, due to the most advanced coating technology followed by a specialized surface treatment. This also provides enhanced tool life due to lesser surface stress and an uniformly coated top surface. The even surface contributes to smooth uninterrupted chip flow, less introduced heat and less friction. The new process enhances toughness and chipping resistance and thus lessens friction and built-up edge. This in turn increases and prolongs tool life at increased machining conditions for all types of work piece materials. The new PVD process is composed of Iscar's AL-TEC coating technology, utilizing the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's revolutionary HM90 APCR 220605-CS grooved carbide inserts put an end to chip jamming complications in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts made specifically for aluminum milling. With 2 grooves pressed into each polished cutting face, the inserts split aluminum chips into a manageable size for easy, reliable evacuation despite the application's characteristic elevated chip volume. The 22 mm inserts, each with 2 edges, are designed to maximize metal removal over the comprehensive range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work specifically well with Iscar's brand new HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and reduce chatter in long-overhang setups. The inserts feature a cavity on the bottom to be certain correct mounting in cutter chip pockets equipped with standard spring pins. For optimal chip control, Iscar advises using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

The Latest In Carbide Endmill Architectures In A Long And Prospering Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Offers A New Family Of Slitting Cutters Utilizing Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Adds Their Latest Innovations To A Lengthy Line Of Prospering Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

A Few Of The Countless Improvements In Carbide Inserts Coming From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

A Handful Of Upgrades In Carbide Inserts Thanks To Iscar Across The Former Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Push Pull Testing For Building Industry With Calibrated Measuring Instruments. Stress Load Testing Procedures For On Site Documentation To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Be Aware Of Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.

Modern Car Manufacturing Jobs To Assist Saving The Economic State
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.